logo for series

Day #1 – Tuesday, March 18th: Prepare Pattern, Cut Fabric, Mark Seam Lines

Day #2 – Wednesday, March 19th: Adjust Pockets, Apply Canvas and Interfacing

Day #3 – Thursday, March 20th: Sewing the Facing and Lining

Day #4 – Friday, March 21st: Sewing the Main Body Seams and Adding Shoulder Pads

Day #5 – Saturday, March 22nd: Creating the Collar

Day # 6 – Sunday, March 22nd: Inserting the Sleeves

Day #7: – Monday, March 23rd: The Finishing Touches

Today, on the third day of our Tailored Peacoat Series, Dana will be teaching a few tricks to put into practice while sewing your Goldstream Peacoat facing and lining:

The Facing and Lining I overcut coat linings, with the exception of the front edge that is attached to the facing.  Fabrics, especially slippery lining fabrics, tend to shift and not always do what you want them to, so its very helpful having a bit of extra fabric to work with. I sewed the front facing to the front lining, stopping about an inch from the hem, trimming the seam allowances to 1/4” and inserting a strip of bias cut from the wrong side of my lining fabric.  The bias strip is purely decorative, but can be a nice little bit of color.  Instead of doing an interior patch pocket, I made double piped pockets.

Welt pocket

Sew the coat front and the facing/lining together, from the collar notch where you stopped trimming the canvas to the end of the facing at the hem.  Its easiest to sew with the coat side facing up, and stitching about a needle’s distance from the canvas.  Grade the seam allowance and press the seam open.  Baste the front edge, rolling the facing to the inside below the top button mark. When you get to the lapel, baste so the seam is in the center. 

baste front edge

Once the edges are basted, run a line of basting in the center of the lapel, then baste the roll line, stopping about an inch below the neck edge.

baste lapel and roll line

Fold the lapel over, and working from the inside of the coat, baste a couple lines, working from the edge of the coat towards the lining.  Folding the lapel will ensure it has enough room to roll easily when worn. Baste close to the facing/lining seam, then fold the lining back and cross stitch the facing to the canvas, working around the pocket.

cross stitch facing to canvas

Fold the lining back far enough so the pocket can lay flat, then cross stitch the side of the pocket to the canvas.

cross stitch pocket

Lay the lining flat, and baste it down, leaving plenty of room for the armscye, side seams, and hem.

baste lining

From the front of the coat, trim the lining even with the wool around the shoulders, armscye, and side seams.

Trim lining

At the neck edge, clip the facing to the neckline about 1” past the roll line.

clip facing

Then, fold the fabric under and even with the neck edge.  Baste, then slip stitch, down.

fold uner and baste

The fronts are done! The Back and Lining I cut the back lining from the same piece as the back, since I’m not using the back facing.  I did leave enough in the lining for an ease pleat center back.  Once the center back seam and center back of the lining are sewn, baste them together along the center back seam, then in a horseshoe shape, leaving room for side seams, shoulder pads, and hems.

baste lining to back

  Now that all the lining and facing pieces are assembled and basted to the main coat, we are ready to sew the main coat seams and insert the shoulder pads tomorrow!
March 20, 2014 — 33363409


Sandra (Sewist-Stitch) said:

I really, really want to make a Peacoat, but for now I’ve got a few other projects in the way. But I’m looking forward to using this great information for when I can get this project to my sewing table. Thanks so much for sharing.

dressingtherole said:

thank you so much for this amazing series. I will definitely refer back to it often next time I am trying to create a tailored garment! I love how your patterns include so much teaching – I’ve learned a lot!

Tailored Peacoat Series: #5 | Thread Theory said:

[…] Day #3 – Thursday, March 20th: Sewing the Facing and Lining […]

Annette said:

I’m not ready to make my husband and son’s peacoats yet, but I am staying with this series to keep me inspired. Thank you for the tailoring directions.

ThreadTheory said:

This entire series will be easily accessible from the Sew-Along drop down on our website so you’ll be able to use it whenever you get time to start your coat. :)

ThreadTheory said:

Wonderful, I love hearing that! I often worry we don’t do enough tutorials compared to some of the amazing blogs and companies out there so it is great to have guest bloggers filling that gap for us!

Tailored Peacoat Series: #4 | Thread Theory said:

[…] Day #3 – Thursday, March 20th: Sewing the Facing and Lining […]

Tailored Peacoat Series: #7 | Thread Theory said:

[…] Day #3 – Thursday, March 20th: Sewing the Facing and Lining […]

Tailored Peacoat Series: #6 | Thread Theory said:

[…] Day #3 – Thursday, March 20th: Sewing the Facing and Lining […]

ThreadTheory said:

I’m glad you’re enjoying the posts!

Leave a comment

Please note: comments must be approved before they are published.