DSC02876DSC02877

I finished Colette Pattern's Negroni men's button up shirt!  Here is my husband looking dashing in it: IMGP0009 And a view on the hanger before I added buttons:

DSC02869

Colette Pattern instructions were wonderful, leading me through each detail step-by-step complete with many more illustrations then you would expect from one of the big pattern companies.  Nifty finishing steps were included such as sturdy flat-felled seams and a tricky but well explained lined yoke. DSC02873 The first few times my husband tried the shirt on in the early stages of the sewing process, we were both a little worried about how well the convertible collar would sit and how fitted the body of the shirt would be.  The facings added a lot more bulk than I was accustomed to along the centre front and caused the collar and neck area to ripple a little bit instead of sitting crisply.  I continued sewing along, trusting the quality of Colette instructions and was not at all dissapointed.  I added  topstitching at centre front just to make sure the facing wouldn't peek out.  Once on, the shirt looks great, it is a fairly slim fit and the grosgrain, button holes and topstitching secure the facing completely in place. IMGP0008 IMGP0010 IMGP0012 In addition to the pattern's features I added shoulder details, contrasting yoke and cuffs, a grosgrain ribbon underneath the buttons, and contrast thread when sewing the buttons on.  Below is a little photo tutorial for my shoulder and ribbon additions in case you are curious how I added these details! Shoulder Detail: To create the shoulder detail shape, create a tissue pattern piece to use when cutting out all other included pieces. To do this, trace the front shirt piece (Piece A) on tissue paper.  Trace along the neckline, shoulder and arm hole and across from the arm hole to the shoulder to create a style line (account for 3/8 seam allowance on the style line where you will fold later to hide raw edges).  Cut out this pattern piece in either self or contrasting fabric to create a shoulder detail that fits perfectly on top of the existing Piece A as shown below: IMGP0001 Fold style line under and press: IMGP0004 Topstitch shoulder detail to shirt front, keeping within the seam allowances on shoulder, neck and arm edges.  Edgestitch along style line:

Negroni Tutorial 002

Sew up the rest of the shirt as directed resulting in a subtle shoulder detail like this!:

DSC02871

Grosgrain Ribbon: For this detail, you will need a metre of 1/4" wide grosgrain ribbon in the colour of your choice: DSC02867 I added the ribbon just before hemming because I wasn't sure, when completing the collar earlier on in the sewing process, if  I actually wanted to add a ribbon.  You could either add your ribbon before attaching the collar so that the top end of the ribbon is enclosed on the neck seam or you could add it before hemming as I did if you'd prefer to see how it would look on a more completed shirt. Line up the grosgrain ribbon along the button placement markings on the right side of the shirt (the right side when you are wearing it, the left side when you have it face up on the table in front of you...this is always confusing!): DSC02857 Fold under the top edge of the grosgrain ribbon and stitch around all edges of the ribbon through both the shirt front and the facing layers.  Make sure that the sides of the tucked in ribbon end are enclosed by your stitching.  At the hem, simply snip off any extra ribbon so the ribbon end is in line with the hem seam allowance: DSC02865 Continue sewing as per the Colette instructions.  When you go to sew your buttons on, place them directly on top of the grosgrain ribbon. DSC02875 And last but not least, now that my triumphs have been thoroughly documented, here's a very sad "oops"...I snipped through the shirt front when trimming seam allowances! DSC02862

Comments

ThreadTheory

ThreadTheory said:

Good question! I don’t really remember making any changes to it (it was quite a while ago now) but I agree, it does look narrower than other photos of the Negroni, doesn’t it? I wonder if I just sewed with a slightly larger seam allowance than I was supposed to. I don’t think I actually did it purposely so I imagine it was only a slight adjustment (try 1/8" larger seam allowance). Also, its hard to tell in the photos but the cotton I used was REALLY stiff and caused the shirt to sit differently than Colette’s sample versions. Having the collar more upright in my photos rather than spread out might make it look smaller. Good luck with your shirt!

littlepostcards

littlepostcards said:

Hi, lovely shirt! Did you draft a new collar, or narrow the collar considerably? By how much? I really like the width of the collar here.

Leave a comment

Please note: comments must be approved before they are published.